THC & CBD Oil Vape Hardware · All-in-One OEM

Empty All-in-One Vape Hardware for THC and CBD Oil Brands

QQVape supplies empty all-in-one vape hardware for THC and CBD oil brands, from distillate to live resin and live rosin. D59, D52, D50 and D19 are the lead models; the D58 dual-chamber device, a mini device, two 5ml large-tank devices, a replaceable-pod system and a portable wax vaporizer are available by quotation. For 510 cartridges and batteries, see the 510 thread range. For formulation-focused selection, read the hardware guide for Distillate, Live Resin, Live Rosin and D9.

10,000 pcsTotal MOQ per model
3,000 pcsNormal minimum per color
7–12 daysStock color and neutral packaging
Empty hardwareNo CBD, THC, nicotine or e-liquid

Order structure: One model must reach 10,000 pcs in total, normally with at least 3,000 pcs per color. Stock colors with neutral packaging normally require 7–12 days after deposit when materials are ready.

Compare Featured D-Series Concentrate Devices

These four models are the main production-ready choices. Compare tank capacity, body format and controls first, then open the dedicated product page for complete dimensions, materials and OEM order details.

D-Series quick comparison
ModelTankBody formatBatteryResistanceControl
D592mLScreen-equipped, postless260mAh1.8ΩInhale activated
D520.5mL / 1mLSlim, 14.0mm wide250mAh1.4ΩInhale activated
D501mL / 2mLCompact, wide body250mAh1.4ΩInhale activated
D192mL / 3mLHigher-capacity body380mAh1.4ΩInhale activated (button version: D19-V2)

More All-in-One Concentrate Devices

These models add dual-chamber, mini and 5ml large-tank formats. They are secondary project options rather than separate product pages; we confirm the final configuration in the quotation.

D58 dual-chamber postless concentrate vape device with screen, two 1ml or 1.5ml tanks

D58

Dual-Chamber Postless Device

Two separate tanks, each with its own ceramic heating core, let one device carry two oils.

Capacity1ml + 1ml / 1.5ml + 1.5ml
Resistance1.6Ω, dual ceramic heating cores
Center postPostless
Battery280mAh
Voltage2.8V / 3.0V / 3.2V
ActivationInhale activated
DisplayScreen
ChargingUSB Type-C
Size83.0 × 37.0 × 13.5mm
Q5-M1 mini all-in-one oil vape, 1ml or 2ml, 63.55 × 21.8 × 12.3mm, 15.9g

Q5-M1

Mini All-in-One, 1ml / 2ml

The smallest and lightest body in this range at 15.9g, with an SUS316L stainless steel center post.

Capacity1ml / 2ml
Resistance1.4Ω
Center postSUS316L stainless steel
Inlet4 × 1.5mm
ActivationInhale activated
Output3.6V
Battery260mAh
Size / weight63.55 × 21.8 × 12.3mm / 15.9g
Q5-L1 large-capacity all-in-one oil vape with screen, single tank up to 5ml or dual 2.2ml tanks, 68.4 × 43.5 × 22mm

Q5-L1

Large-Capacity, Single or Dual Tank

One body takes a single tank up to 5ml or two tanks up to 2.2ml each. The top setting of 3.0V keeps power near 6.4W, a lower-temperature option for live resin.

CapacitySingle 3.5 / 4 / 5ml, or dual 1ml + 1ml / 2.2ml + 2.2ml
Resistance1.4Ω (customizable)
Inlet4 × 1.8mm
Voltage2.4V / 2.7V / 3.0V, 1.8V preheat
Battery400mAh
DisplayScreen
ChargingUSB Type-C, bottom port
Size68.4 × 43.5 × 22mm
Q5-L2 large-capacity oil vape device, 2ml to 5ml single tank, shown in four colors

Q5-L2

Large-Capacity, High-Power, up to 5ml

A single tank from 2ml to 5ml with a 3.8V top setting, about 10W at 1.4Ω, for thick distillate. One button handles power, preheat and voltage.

Capacity2ml; 3 / 4.3 / 5ml versions
Resistance1.4Ω
Inlet4 × 1.5mm (customizable)
Voltage2.6V / 3.2V / 3.8V, 1.8V preheat for 8 seconds
Controls5 clicks on/off · 1 click shows battery and level · 2 clicks preheat · 3 clicks change level
DisplayBattery and voltage level
Size / weight71.0 × 41.1 × 18.5mm / 34.6g (5ml)

All-in-One Device Specs at a Glance

Eight empty all-in-one devices for THC and CBD oil. Power is voltage² ÷ resistance, rounded. Every model on this page starts at 10,000 units, normally with at least 3,000 per color.

ModelTankBatteryResistanceOutputApprox. powerActivation
D592mL, postless260mAh1.8Ω3.0V5.0WInhale
D520.5 / 1mL, SS316L post250mAh1.4Ω2.8 / 3.0 / 3.2V5.6–7.3WInhale
D501 / 2mL250mAh1.4Ω2.8 / 3.0 / 3.2V5.6–7.3WInhale
D192 / 3mL, SS316L post380mAh1.4Ω3.0 / 3.3 / 3.7V6.4–9.8WInhale; button on D19-V2
D581+1 / 1.5+1.5mL dual tank, postless280mAh1.6Ω (two cores)2.8 / 3.0 / 3.2V4.9–6.4WInhale
Q5-M11 / 2mL, SS316L post260mAh1.4Ω3.6V9.3WInhale
Q5-L13.5 / 4 / 5mL, or dual 1+1 / 2.2+2.2mL400mAh1.4Ω2.4 / 2.7 / 3.0V + 1.8V preheat4.1–6.4WConfirmed with quote
Q5-L22 / 3 / 4.3 / 5mLConfirmed with quote1.4Ω2.6 / 3.2 / 3.8V + 1.8V preheat4.8–10.3WButton

Reusable Pod & Wax Devices

These devices recharge and stay in use. The Q5-P1 takes replaceable 0.9ml oil pods. The Q5-W2 heats solid concentrate in an open 0.5mL chamber.

Q5-P1 oil pod system with screen and 0.9ml replaceable pod

Q5-P1

Pod System, 0.9ml Replaceable Pods

The battery stays in use and the user swaps 0.9ml pods. Each pod has an SUS316 stainless steel center post.

Pod capacity0.9ml, replaceable
Resistance1.2Ω
Center postSUS316 stainless steel
Inlet4 × 1.4mm
ActivationInhale activated
Output3.2V
Battery280mAh
DisplayScreen
Size / weight90.1 × 28 × 15.4mm / 30g
Q5-W2 portable wax vaporizer with 0.5ml chamber, front and side view

Q5-W2

Portable Wax Vaporizer, 0.5mL Chamber

Five voltage levels let users set the heat for the concentrate. Built for solvent-based concentrates; not recommended for solventless rosin.

Chamber0.5mL
Resistance1.3Ω
Battery280mAh
VoltageFive levels, 2.8–3.6V (6.0–10W)
ActivationButton
HousingPC
ChargingUSB Type-C
Size89.12 × 32.7 × 20.1mm

Choose Hardware by Oil Type

Start from the oil you fill. Thick distillate needs more heat to flow. Terpene-rich live resin and solventless rosin usually keep more flavor at lower power. Use these as starting points, then confirm with samples filled with your own oil.

THC or CBD distillate (thick)Start with the D19: a 380mAh battery and up to 3.7V, about 9.8W on its 1.4Ω core. For 3.5–5mL fills, compare the Q5-L2, which reaches 3.8V and adds a 1.8V preheat.
Live resinStart with the D59: a fixed 3.0V output on a 1.8Ω core runs at about 5W. The D52 and D50 offer 2.8V, 3.0V and 3.2V if you want to tune the heat.
Live rosin (solventless)Use the lowest settings: the D52 or D50 at 2.8V (about 5.6W), or the Q5-L1 at 2.4V (about 4.1W) with preheat. Rosin flavor is the most sensitive to heat, so test before you commit.
Two oils or flavors in one deviceThe D58 carries two separate 1mL or 1.5mL tanks, each with its own ceramic core. The Q5-L1 also comes in a dual-tank version.
Wax, badder or shatterThe Q5-W2 heats a 0.5mL chamber with five voltage levels. It suits solvent-based concentrates, not solventless rosin.

Choose Hardware by Tank and Control Format

Start with the filling volume and body format required by your project. Then compare activation method, battery capacity, resistance and verified dimensions. A similar exterior does not mean two devices use the same tank or control configuration.

Slim 0.5mL / 1mL projectsD52 uses a 14.0mm-wide body and inhale activation.
Screen-equipped 2mL starting pointD59 is the recommended first comparison when feature-to-cost balance and a screen are priorities; compare D50 when a wider 1mL / 2mL body is preferred.
Higher-capacity 2mL / 3mL projectsD19 adds a 380mAh battery and output up to 3.7V. Choose the D19-V2 when your project needs button activation.
Two-oil projectsD58 carries two 1ml or 1.5ml tanks, each with its own ceramic heating core, in an 83.0 × 37.0 × 13.5mm body.
Smallest bodyQ5-M1 weighs 15.9g in a 63.55 × 21.8 × 12.3mm body, with an SUS316L center post.
Up to 5mlChoose Q5-L1 for lower power (up to 3.0V) or a dual-tank option. Choose Q5-L2 for higher power (up to 3.8V) with thick distillate.
Replaceable podsQ5-P1 keeps one battery in use while the user swaps 0.9ml pods.
Wax and solid concentrateQ5-W2 heats concentrate in a 0.5mL chamber with five voltage levels. Use it for solvent-based concentrates, not solventless rosin.

Samples, Testing and Quality

1. Test with your oilSend the oil type, viscosity, fill size and target market. Paid samples are quoted by model and quantity.
2. Tune the hardwareWe can adjust voltage, coil resistance and inlet size to suit your oil before you approve a sample.
3. Produce to the approved sampleProduction follows a sealed approved sample. You get inspection photos or video before shipment.
Test reportsTest reports (SGS and others) are issued to our manufacturing partners for each model and shared before you order.

Need 510 cartridges or batteries instead? Compare eight empty 510 cartridges, including the postless D55, on the 510 cartridge page. Ready to test? See trial orders and samples.

MOQ, Lead Time and Payment

ItemRule
Total MOQ per model10,000 pcs for any model on this page
Normal color splitNormally at least 3,000 pcs per color
PriceAvailable on request
Stock color, neutral packaging7–12 days after deposit, when materials are ready
D-series custom color or packagingAround 15–18 days after artwork or CMF confirmation
Other custom workLead time confirmed with quotation
Payment50% deposit and 50% balance before shipment
FreightEXW China; freight is paid by the buyer. Forwarder introduction is available.
Before ordering: Confirm the model, capacity, color split, logo, packaging, destination country and final production lead time. Specifications not listed above remain available on request.

THC and CBD Vape Hardware OEM Questions

Which D-series model should I start with?

Start with D59 when a screen-equipped 2mL device and feature-to-cost balance are priorities. Choose D52 for a slim 0.5mL or 1mL format, D50 for a wider 1mL or 2mL body, or D19 for 2mL or 3mL capacity. The standard D19 fires on inhale; ask for the D19-V2 if you need button activation.

Does a 3,000-piece color split reduce the total MOQ?

No. One model must still reach 10,000 pcs in total. The normal minimum is 3,000 pcs for each color in that order.

How long does D-series production take?

Stock colors with neutral packaging normally require 7–12 days after deposit when materials are ready. Custom colors or packaging require around 15–18 days after artwork or CMF confirmation.

Are the devices supplied prefilled?

No. QQVape supplies empty hardware only. The devices contain no CBD, THC, nicotine or e-liquid.

Should I test my concentrate before mass production?

Yes. The hardware is designed for evaluation with distillate and concentrate formulations, and sample testing is recommended before mass production.

Does the D58 hold two different oils?

Yes. The D58 has two separate 1ml or 1.5ml tanks, each with its own ceramic heating core. Test both formulations in the device before mass production.

What is the difference between the Q5-L1 and the Q5-L2?

Both hold up to 5ml. The Q5-L1 tops out at 3.0V, about 6.4W at 1.4Ω, and also comes as a dual-tank version. The Q5-L2 reaches 3.8V, about 10W at 1.4Ω, in a single tank for thick distillate.

Can the Q5-W2 wax vaporizer be used with solventless rosin?

We do not recommend it. The Q5-W2 is rated for solvent-based concentrates, not solventless concentrates such as live rosin.

Can these devices be used with THC distillate and live resin?

Yes. These are empty devices for THC and CBD oil, including distillate, live resin and live rosin. Viscosity and filling conditions vary by batch, so test samples with your own oil before mass production. QQVape supplies empty hardware only. Buyers handle licensing and product compliance in their own market.

Which model fits a 0.5g, 1g, 2g or larger product?

The D52 covers 0.5mL and 1mL slim pens. The D50 and D59 cover 1mL and 2mL. The D19 covers 2mL and 3mL. For 3.5mL to 5mL, compare the Q5-L1 and Q5-L2.

Compatibility refers only to the relevant connector or interface standard. QQVape is not affiliated with RELX, OXVA, Marbo, or any other third-party brand. All trademarks belong to their respective owners. Products are supplied as empty hardware and contain no nicotine, CBD, THC, or e-liquid. Buyers are responsible for confirming import, product and market compliance in the destination country.



How can I help you?